You’ve heard various impressions about Omega masticating juicers, but still can’t decide which one – Omega NC800 vs NC900? I was lucky to see both of these top-quality selection models in action and today, I am sharing the key differences between them.
Although these differences are rather subtle, they say the devil is in the detail. Depending on what type of juice you want to make, you will have a crystal-clear idea of the right Omega model for you in just a few minutes.
Differences Between Omega NC800 and NC900
Omega NC800HDS Juicer
|View On Amazon|
Omega NC900HDC Juicer
|View On Amazon|
The Omega NC800 and NC900 feature the same dimensions (14.5 x 6.5 x 15.5 inches), but they don’t have the same weight. The first model weighs 18,7 pounds while the latter weighs 13 pounds. They even boast a pretty similar construction at first glance. However, where did those 5,7 pounds go?
One of the key differences between these two models is in the construction materials. The Omega NC800 is made of 18/8 stainless steel, which justifies its weight. On the other hand, the NC900 is made out of plastic.
It all depends on whether you want a movable juicer or a sturdy, more durable one? If you ask me, nothing beats stainless steel constructions. Food-grade stainless steel is the golden standard when it comes to kitchen appliances. Yet, the NC900 is made out of BPA-free plastic, which is a fairly decent replacement for stainless steel.
Basically, if you need a compact, not overly bulky juicer both models will work. Yet, if you don’t want to invest too much effort into moving it around the kitchen, go for a lighter one – the NC900.
The Omega NC800 and NC900 both come with industry-leading warranties of 15 years. This warranty covers performance and parts, which is a major pro. Most juicers come with warranties that cover the parts except the motor or don’t cover performance and parts at the same time.
However, besides the fact a 15-year warranty already speaks for itself and proves the durability of these 2 models, I can’t remain silent about one thing. The Omega NC800 simply feels more durable. This heavy-duty model gives off an impression of professional, long-lasting performance for its build materials.
The Omega NC900 is fully made of plastic, which means it wears out faster. Although the warranty covers the plastic parts as well, I believe it would be quite annoying to be on the line with customer support, looking for replacement parts, year after year. The Omega NC800 had a special place in my kitchen for 5 years straight and it never failed me, which was not the case with the NC900.
Masticating juicers rarely make too much noise. With Omega juicers, making smoothies, juices, sorbets, and baby food turns into a real pleasure. Neither of these two models makes an unbearable noise. If you have a baby or live in a small apartment, a loud juicer is a big no-no.
The quiet operation of the Omega NC800 and NC900 is very hard to beat. However, from my personal experience, there is a slight difference between these two models. The NC900 seems to be quieter for some reason. It could be plastic absorbs the noise better than stainless steel.
It doesn’t make much of a difference but if you are looking for an almost noiseless juicer, the NC900 might be it.
4. Buttons and Controls
The Omega NC800 and NC900 have identical settings. Both come with one button only (on the side), which simplifies the juicing process. Yet, you can set it to the “ON” or “REV”. The first setting turns the machine on, while the second breaks down buildups. If you feed the cute slowly, you will never have to use the reverse setting, which is what I really appreciate about Omega juicers.
Now, speaking of speed settings, I have found a small con to the NC800. Both juicers have adjustable end cup settings but the NC800 seems not to perform well with cucumbers. No matter which speed setting you choose, it simply can’t produce pure cucumber juice, while it is child’s play for the NC900.
Overall, both appliances are fairly simple to use and give you a decent level of control but the NC900 may be a more versatile one.
5. Food Preparation
Although Omega classifies the NC800 and NC900 as “juicer extractor and nutrition center”, these two units perform differently with different types of foodies. For instance, the NC900 works best with fruits and citruses, leafy greens, root greens, nut milk and butter, and baby food.
The Omega NC800 is the type of juicer you can make soy and almond milk, nut butter, baby food, and most veggies and fruits. However, as I already mentioned, it doesn’t work well with cucumbers and apples for some reason. When I was trying to make apple juice with it, I got applesauce instead. Nevertheless, this model still makes a hella good leafy green, wheatgrass, and orange juice.
Once again, it all comes to a simple question – what type of juice you want to make with your juicer? If you prefer apple juice and cucumber-lime Mojitos, the Omega NC900 might be a better pick, otherwise – the NC800 would do just fine as well.
I noticed juicing carrots with either NC800 or NC900 takes some extra time. Both units come with slightly narrower feed chutes so you would have to pre-cut carrots and other root veggies. Although this is not a big deal and takes no more than 1 minute, it’s better to know what to expect in advance.
The Omega NC800 and NC900 are still total winners and my personal favorites when it comes to food preparation in the category of horizontal masticating juicers.
6. Juice Taste
Omega never misses when it comes to juice taste, at least in my experience. However, I did notice a very slight metallic taste of my wheatgrass juice when I made it with the Omega NC800. This was not a deal-breaker for me as I already knew this could happen with metal juicers.
On the other hand, this never happened with my NC900 but I still preferred the first model for a couple of reasons. With masticating juicers, there is no much heat involved so oxidation can’t spoil the taste of your juice. If you want to store it in the fridge, go ahead. Your juice will remain fresh and crisp for up to 72 hours.
However, for some reason, the juice I made with the NC800 remained almost the same even after storing it for 3 days while I could taste a before-and-after difference in the juice I made with the NC900. I am not saying here the juice was bad, not at all. It just became a bit mushy, which is not a big deal. The point is – the NC800 provides a longer-lasting juice taste and structure. Yet, if you typically don’t consume juices older than 1 day, the NC900 would do just fine.
Don’t know about you but I am not a fan of pulpy juices. With the Omega NC800, the pulp is always dry as a bone. This makes it super-easy to separate it from the juice. Yet, the NC900 failed me a couple of times when it comes to clear and pure juice. It was simply too wet and managed to sneak into my glass.
Note that this happened occasionally with my NC900, so not a deal-breaker if you don’t mind pappy juices. However, if you prefer smooth and clear juice, like me, the NC800 would be a better choice.
Neither of these two models will take an eternity to clean. However, you don’t have to be Mastermind to figure out you can’t put plastic in the dishwasher, right? The Omega NC900 is all plastic, which means you have no other choice but hand-wash it. That’s why Omega includes a cute cleaning brush with this model and makes the cleanup way easier. It takes no more than 5 minutes to disassemble and clean the appliance.
My favorite when it comes to cleaning is the Omega NC800 but solely because I have a dishwashing machine now. When I didn’t have one, the NC900 did a pretty good job as well. Having a choice is nice. With the NC800 you can throw it in a dishwasher or wash it by your hands while you don’t have a choice with the NC900.
Do you care about the aesthetics of your juicer or your kitchen in general? Then you should know the Omega NC800 features chrome, glossy finish while the NC900 is a matte version of it. The plastic construction of the latter model makes it appear less elegant, even a bit cheap in my opinion. However, be careful about leaving fingertips on the stainless steel exterior of the NC800.
When it comes to price, the difference between Omega NC800 and NC900 is minimal. Does this reflect their overall performance as well? If you ask me, I would pay a fortune for the NC800. This baby is totally worth it considering its durability and performance.
However, I am not saying the other model is anything less. It’s just – I wouldn’t pay again the same amount of money for a product made of plastic. It is a bit nerve-wracking to think about whether something will break in the process. With the NC800, there is no second-guessing. This heavy-duty model is almost unbreakable, which justifies its price in the end.
Omega NC800 vs NC900 Final Verdict
The Omega NC800 vs NC900, which one is your favorite at the end of the day? Although these two models look almost the same and perform almost the same, I have spotted a couple of remarkable differences here. If you value durability in the first place, the Omega NC800 might be the juicer that can meet your expectations. The Omega NC900 comes at a slightly higher price but it could be a good pick if you can’t do without cucumbers and apples.